Victorian Tile Cleaning Archives - South East Wales Tile Doctor

Geometric Mosaic Edwardian Floor Restoration Cardiff

Edwardian Geometric Mosaic Tile Restoration in Cardiff

Earlier this year I was contacted by a homeowner in Cardiff to see if anything could be done to save their Edwardian tiled hallway floor. They had previously contacted another local company who advised to remove the floor and have it retiled. They felt upset to hear this news, having discovered the tiles under the hallway carpet and realised they must be original from when the house was built in 1910. Ideally, they wanted this original feature restored and so they reached out to us.

Geometric Mosaic Edwardian Floor Before Restoration Cardiff

Having spoken to them over the phone I was happy to re-assure them that the floor could be restored and arranged a visit to survey the floor and carry out a cleaning test to see what could be achieved.

The floor although in a bad way was very impressive, someone had clearly spent a lot of time laying down a mosaic of what must have been thousands of small square tiles arranged in a repeating geometric pattern. During the visit I realised extensive tile repairs would be required however the sample clean proved successful and the clients were delighted.

Geometric Mosaic Edwardian Floor Test Clean Cardiff

I worked out a quote for the restoration which they were happy to accept, and a date was arranged for my return.

Repairing and Cleaning Edwardian Mosaic Floor Tiling

Work started with tile repairs which were done with replacement tiles cut to size, secured with adhesive and grouted in. The floor was then left to set hard before moving onto the next step of cleaning.

Before the carpet had been installed a thin layer of self-levelling cement had been spread across the floor and this had to be removed. To do this I carefully scraped off as much cement as possible along with paint splashes and remnants of plaster all of which were marking the tiles. The waste from this was then swept and bagged up.

To get the floor clean, a mixture of Tile Doctor Nanotech HBU and Pro-Clean were mixed together and applied to the surface working on one square meter at a time. The solution was rinsed, worked in with a Black scrubbing pad and then rinsed again before being extracted with a wet vacuum with clean water and then vacuumed away.

After carrying out the same procedure on the rest of the floor I then started the second procedure which was to apply Tile Doctor Grout Clean-up using wire wool to remove all the cement residues. Again, this was rinsed off with clean water and vacuumed away as I worked.

These two processes removed all the dirt and contaminants from the floor leaving the tiles clean, after a final rinse I used the wet vacuum again to get the tiles as dry as possible and ready for sealing the next day.

Sealing an Edwardian Mosaic Tiled Hallway Floor

The clients wanted a satin shine finish so after leaving the floor to dry overnight it was tested for moisture the next day and this confirmed the floor was dry enough for their desired sealer application.

The choice of sealer was Tile Doctor Seal & Go which produces a lovely satin finish and highlights the colours. Another advantage is being a water-based product it doesn’t leave a smell as it dries.

The floor responded really well to the treatments and I’m please to say the owners were delighted with the final result and eager to recommend Tile Doctor to their family and friends.

Geometric Mosaic Edwardian Floor After Restoration Cardiff

The sealer will protect the floor by ensuring dirt remains on the surface where it can be easily cleaned away using a sealer sensitive tile cleaner such as Tile Doctor Neutral Tile Cleaner.

Geometric Mosaic Edwardian Floor After Restoration Cardiff

Professional Restoration of an Edwardian Mosaic Floor Tiling in South Wales

Edwardian Geometric Mosaic Tile Restoration in Cardiff Read More »

1930 Geometric Tiled Floor Cleaning Cardiff

Cleaning and Sealing a Victorian Tiled Hallway Floor in Cardiff

A homeowner from Cardiff was in touch earlier this year regarding their 1930’s Geometric tiled floor more commonly referred to a Victorian. These floors are created using encaustic cement tiles benefit greatly from being sealed to prevent dirt from becoming ingrained in the tile and in this case the sealer had worn off some years ago.

1930 Geometric Tiled Floor Before Cleaning Cardiff

I paid a visit to the property to survey the floor and come up with a restoration plan and produce a quote for work. It was clear that the floor had seen many years of heavy foot traffic since it had been last renovated and now you could see black staining building up on the tile. This had not gone unnoticed by the owner and wanted the floor restoring to its former glory.

1930 Geometric Tiled Floor Before Cleaning Cardiff

I worked out a quote which was accepted and we agreed a date for the work to start.

Deep Cleaning a Victorian Tiled Hallway Floor

To get the floor clean I created a 50:50 solution of two Tile Doctor products, Pro-Clean and Nanotech HBU Remover. The two products combine to create a very powerful alkaline tile cleaning product. The solution was applied neat to approximately one square meter at a time and after leaving it to soak for ten minutes it was worked in using a hand size scrubbing pad cut from a Black 17-inch floor pad.

This is an aggressive pad which helps shift the dirt with the help of the products which penetrate the pores of the tile to lift out the ingrained dirt. After working on the area for around five to ten minutes at a time it was rinsed with water and the soiling extracted with a wet vacuum.

The next step was to repeat the process using Grout Clean-up which is an acidic cleaning product that helps to further clean up the tiles, removing old cement residues and will dissolve any efflorescent salts that may be present in the floor. After another rise and extraction, I was able to move on to the next square meter.

Hallways lend themselves well to this approach as you can start at one end and progress down the floor, working in this manner also ensures each meter is checked and any issues are resolved as you progress.

One the whole floor had been cleaned in this way it was left to dry off overnight.

Sealing a Victorian Tiled Hallway Floor

The following day I returned and first used the damp meter to check that the floor was dry enough to seal. Satisfied with the results I began with the application of the first coat of sealer which for this floor we used Tile Doctor Seal and Go. This sealer provides a satin shine finish which also enhances the deep vibrant colours of the tiles.

1930 Geometric Tiled Floor After Cleaning Cardiff

The customer was delighted with the results so much that they asked me to return later to restore the Red Quarry tiled floor in there dining room. Before leaving I took time to discuss aftercare cleaning for which I recommended the use of Tile Doctor Neutral Tile Cleaner, this is a gentle but effective tile cleaning product designed for use on sealed floors that will ensure easy maintenance and keep the floor in great condition.

1930 Geometric Tiled Floor After Cleaning Cardiff

Professional Restoration of a Victorian Tiled Hallway in South Wales

Cleaning and Sealing a Victorian Tiled Hallway Floor in Cardiff Read More »

Black and White Geometric Victorian Tiled Hallway Floor After Renovation Llantwit Major

Classic Victorian Tiled Geometric Floor Renovated in Llantwit Major

1 Comment / Llantwit Major Tile Cleaning, Victorian Tile Cleaning / Julian Iancono

This client from Llantwit Major contacted Tile Doctor regarding their Victorian tiled hallway floor which was a classic Black and White geometric design but was now stained and in need of renovation. I’m the local Tile Doctor agent covering Cardiff and the surrounding area, so they asked me to pop over and take a look.

Black and White Geometric Victorian Tiled Hallway Floor Before Renovation Llantwit Major

Black and White Geometric Victorian Tiled Hallway Floor Before Cleaning Llantwit Major

I contacted the client to arrange a viewing so I could survey the tiles and assess the work involved. The floor had been previously covered in carpet which was glued to the tiled floor. On removal of the carpet, traces of the glue were visible and heavy residues were thick in places. I worked out a quote for re-fixing the loose tiles, deep cleaning the floor and then applying a protective sealer, happy to get the work done the quote was agreed and a date scheduled.

Repairing and Cleaning a Victorian Tiled Hallway Floor

Work started by addressing the loose tiles which were then carefully removed and cleaned up for re use. The gaps left were also cleaned up and the tiles stuck back in place using a quick setting adhesive. I also added new metal trims to the doorway thresholds.

I scraped as much of the glue from the floor surface with a heavy-duty razor blade tool. Then I mixed a solution of Tile Doctor Remove & Go with Tile Doctor Nanotech HBU and a little Tile Doctor Pro-Clean. The combined solution was left to dwell for approximately half an hour before agitating with a course black pad. The dirty solution was then rinsed off with water and removed with a wet vacuum. I repeated this process on a couple of particularly stubborn stains.

The floor was then given an acid wash using neat Tile Doctor Grout Clean-up to remove any old cement residues. Finally, the floor was rinsed again with clean water and dried with a wet vacuum. The floor was then left to dry off fully overnight.

Sealing a Victorian Tiled Hallway Floor

I returned the following morning to check if the floor had dried out. I used a damp meter to take a few moisture readings, which were within the acceptable level. This is particularly important on a floor of this age as there was no damp-proof membrane installed and as a result can take longer to dry out.

The client wanted a low maintenance hard wearing sealer applied, so I selected Tile Doctor Colour Grow which soaks into the pores of the tiles protecting it from within, it also contains a colour enhancer which brought out the contrast in the Black and White tiles. Lastly this sealer is fully breathable and so will allow moisture to rise through the tile and evaporate at the surface; this is an important consideration when selecting a sealer for a floor without a damp proof membrane.

Once complete the floor was transformed, and the client was very happy with the outcome. I recommended for maintenance to use Tile Doctor Neutral Tile Cleaner which will ensure the floor keeps its appearance.

Professional Restoration of a Victorian Tiled Hallway in South Wales

Classic Victorian Tiled Geometric Floor Renovated in Llantwit Major Read More »

Victorian Tiled Hallway Floor Restoration Penarth

Restoration of a Classic Victorian Tiled Hallway in Penarth

1 Comment / Penarth Tile Cleaning, Victorian Tile Cleaning / Julian Iancono

Tile Doctor were approached by a homeowner in Penarth hoping something could be done to improve their beautiful Black and White Victorian tiled hallway floor which had been patched up with concrete during the installation of pipework under the floor.

I paid a visit to the property to survey the tiles, recommend a way forward and provide a quote for the restoration of the floor. It was clear the patched section was backfilled with cement and that would need to be cut away and then re-tiled with replacements. Then to ensure the whole floor looked uniform it would need deep cleaning and sealing.

Victorian Tiled Hallway Floor Before Cleaning in Penarth

Keen for the floor to be restored back to its original appearance I was given the go ahead and so I started the search for replacement tiles that would be a good match to the existing. Fortunately, I was able to source some replica tiles from Tile Doctor who had a selection of similar tiles available from other jobs they have done.

Cleaning and Repairing a Victorian Tiled Hallway Floor

Work started by removing the old mat and carefully cutting out the concrete backfill that went across the floor. The floor tile replacements were then cut to shape and fixed in place with rapid setting adhesive and grouted in using a grey grout similar to the original colour. They were a good match and blended in well.

Once set, the floor was thoroughly cleaned with a handheld black pad using a mixture of Tile Doctor Pro-Clean, Tile Doctor Remove & Go, and Tile Doctor HBU Nanotech Cleaner. These cleaning products all have different qualities and together produce a very effective tile cleaner. Afterwards the floor was rinsed thoroughly with water and the soiling extracted using a wet vacuum cleaner.

Next the floor was treated to an acid wash using Tile Doctor Grout Clean-Up which is a mild acid that removes old grout and cement smears bringing up the appearance of the tiles even more. Finally, after another rinse with clean water and the floor was dried as much as possible with the wet vacuum. The floor was then left to dry off overnight.

Sealing a Victorian Tiled Hallway Floor

Retuning the following morning, the floor looked nice and dry, however, to be sure we tested with the damp proof meter. The readings were good, so we were ready to apply the sealer.

Victorian Tiled Hallway Floor After Cleaning in Penarth

The sealer chosen for this floor was Tile Doctor Colour Grow, the is an impregnator which soaks into the surface of the tiles and provides a matt look and a very hard-wearing protective seal. The floor looked great, the bold black and white pattern really stood out. Colour Grow is also a breathable sealer which is an important consideration when dealing with old floors that don’t have a damp proof membrane.

The client was very pleased with the work we had completed. We recommended the use of Tile Doctor Neutral Tile Cleaner for ongoing maintenance; this is a pH neutral cleaner which is mild enough to be used daily and will ensure that the sealant is kept in place.

Professional Restoration of a Victorian Tiled Hallway in South Wales

Restoration of a Classic Victorian Tiled Hallway in Penarth Read More »

Victorian Tiled Hallway Floor Restoration Merthyr Tydfil

Damaged Victorian Tiled Hallway Floor Restored in Merthyr Tydfil

1 Comment / Merthyr Tydfil Tile Cleaning, Victorian Tile Cleaning / Julian Iancono

Tile Doctor was approached by a client in Merthyr Tydfil who was hoping something could be done to improve their beautiful Victorian tiled hallway floor which had been patched up with concrete during the installation of pipework under the floor.

Victorian Tiled Hallway Floor Before Restoration Merthyr Tydfil

I paid a visit to the property to run some tests, recommend a way forward and provide a quote for restoring the floor. The restoration would need to start with the patched section by removing the cement backfill and then re-tiling with matching replacements. Then to ensure the whole floor looked uniform it would need deep cleaning and sealing.

Keen for the floor to be repaired I was given the go ahead and so I started a search for replacement tiles that would be a good match for the floor. Fortunately, I was able to source some replica tiles from Tile Doctor who have had a selection of similar tiles available from other jobs they had done.

Repairing a Victorian Tiled Hallway Floor

Work started by removing the old doormat and carefully cutting out the concrete backfill that went across the floor.

The rubble was carefully removed and the newly exposed cleaned up so it could be levelled with self-levelling compound which would provide a new base onto which the replacement tiles could be laid.

Victorian Tiled Hallway Floor During Restoration Merthyr Tydfil

Floor tile replacements were then cut to shape and fixed in place with a rapid setting adhesive and grouted in using a grey grout similar to the original colour.

Deep Cleaning a Victorian Tiled Hallway Floor

The floor was left to set overnight and I came back then next day to begin the cleaning process. For this I created a cocktail of three Tile Doctor cleaning products, namely Tile Doctor Pro-Clean, Remove & Go and Tile Doctor HBU Nanotech Cleaner. The products were mixed, diluted with water, and then sprayed onto the tiles. The floor was left for ten minutes to allow the products to soak into the pores of the tile and digest the dirt and coatings such as old sealers.
The floor was then scrubbed with a black pad fitted to a rotary machine to release the dirt etc from the tiles. Afterwards, the floor was rinsed thoroughly with water and the soiling extracted using a wet vacuum.

Next the floor was treated to an Acid Wash using Tile Doctor Grout Clean-Up which is a mild acid that removes grout haze, cement smears and counters any alkaline salts which may have built-up in the tile and could result in efflorescence later.

Finally, another rinse with clean water and the floor was then dried as much as possible with the wet vacuum. The floor was left to dry overnight.

Sealing a Victorian Tiled Hallway Floor

The following day I returned and first used the damp meter to check that the floor was dry enough to seal. Satisfied with the reading I chose to use Tile Doctor Colour Grow to seal the floor. This is an impregnator which soaks into the surface of the tiles and provides a matt look with a very hard-wearing protective seal, perfect for a high traffic area. It allows for the lovely colours of the tiles to shine through.

Victorian Tiled Hallway Floor After Restoration Merthyr Tydfil

The floor responded very well to the treatment and it was impossible to tell where the repair work had taken place. For aftercare cleaning I recommended the use of Tile Doctor Neutral Tile Cleaner, this is a gentle but effective tile cleaning product designed for use on sealed floors that will ensure easy maintenance and keep the floor in great condition.

Professional Restoration of a Victorian Tiled Hallway in South Wales

Damaged Victorian Tiled Hallway Floor Restored in Merthyr Tydfil Read More »

Victorian Tiled Pathway Before and After Rebuild Cardiff

Damaged Victorian Tiled Path Rebuilt in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This Victorian tiled path leading up to a lovely period house in Cardiff was in a really bad state of repair with many damaged and cracked tiles. I had already been working on their hallway tiles and the customer was hoping I would be able to salvage the original tiles in the front path. I was confident something could be done but when I started to remove a few I soon found out that would be unlikely. I made a few calls and fortunately I was able to find replacement tiles in a local salvage yard that were a perfect match.

Victorian Tiled Pathway Before Rebuild Cardiff

The border tiles were a different matter though, so I had to buy new tiles that could be mixed with old for the border which I purchased from original style. I’ve used Original Style tiles on a few occasions in the past, they have a section dedicated to Victorian Tiles and stock quite a few of the popular patterns and decorative border designs.

Rebuilding a Victorian Tiled Path

The foundation of the path was cracked and crumbling so after carefully removing as many tiles that were worth saving I rebuilt the base with a new layer of cement.

Victorian Tiled Pathway During Rebuild Cardiff

Once the new base was dry I was able to start Tiling as normal, I had taken photographs of the original pattern, so I was able progress quite quickly.

Once the central pattern had been laid I progressed onto the edges which took longer to lay due to the complex pattern. Once all the tiles were laid and the adhesive had set I was able to move onto Grouting.

Cleaning a Victorian Tiled Path

Once the tiles were laid and grout had set I was able to move onto cleaning the whole path starting with an acid wash using Tile Doctor Grout Clean-up to remove any grout smears left over from the grouting and also to counter act any salts within the tile which could cause problems later.

After a rinse with water the path was then give a good scrub with Tile Doctor Pro-Clean which is a heavy-duty Tile and Grout cleaner that worked well to brings out ingrained dirt.

Sealing a Victorian Floor Sealing

The path was left to dry off overnight and I came back the next day to seal them, I left protection over the path each night after leaving and fortunately we experienced a rare spell of decent weather that week.

The sealer I chose was Tile Doctor Colour Grow, it’s fully breathable, which is important when sealing tiles exposed to damp conditions and it’s a colour enhancing sealer which brought out the best in the red quarry tiles as well as giving good protection to the tile surface.

Victorian Tiled Pathway After Rebuild Cardiff

My customer was most impressed with the transformation and left the following glowing testimonial on the Tile Doctor feedback system.

“Julian was quick to respond to emails. He arrived on the date we arranged and was finished promptly. We had our hall tiles re-surfaced and the path completely relayed. Where possible outside Julian re-used the old tiles and when not then used new. The final finish is amazing and definitely gives a wow factor to the entrance to the property. Julian is trustworthy and I would highly recommend him and his work. Thanks for the hard work!
Nigel J, Cardiff 15 Jan 2018″

Victorian Tiled floor restored in South Wales

Damaged Victorian Tiled Path Rebuilt in Cardiff Read More »

Victorian Tiled Hallway in Cardiff Before and After Restoration

Original Victorian Tiled Hallway Thought Beyond Repair Rejuvenated in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

Many property owners who are lucky enough to have an original Victorian tiled floor in their homes face the same conundrum: can an old and potentially very damaged floor be salvaged and restored to peak condition or should I replace it?

Some people would instinctively tell you that the answer is no – even trained professionals! In fact, a leading tile restoration company (which shall remain unnamed) based in Cardiff told a recent customer of mine that her original Victorian tiled floor, dating back to 1905, was beyond repair. The company recommended that she not waste any money on having it restored and instead that she should have it ripped up and replaced.

Victorian Tiled Hallway in Cardiff Before Restoration

It was in a bad state, however replacing the floor would incur a significant cost and the original characteristics of the period floor would be lost. The customer was feeling rather deflated and was left undecided on what to do. Fortunately after browsing the web for a solution, she came across Tile Doctor and I was asked to pop over and take a look.

I visited the customer at her home and removed parts of her hallway carpet to get a better look at the Victorian tiles beneath. The floor was certainly in a very poor state, there were many old paint splash marks covering the tiles and the surface of the floor was deeply darkened after many years’ worth of wear and tear. In my opinion however, it was still salvageable, and the customer was happy to see what could be done.

Cleaning an Original Victorian Tiled Floor

A week before I was due to start the restoration, I asked the customer to remove the foam-backed carpet to let the floor breathe a bit.

Before beginning the work, I ran a few damp tests and the floor proved surprisingly dry considering how old it is and the very probable lack of a damp proof membrane. I started by manually scraping as much of the old paint staining off the stone as possible and cleared other debris from the surface.

Knowing that clay based Victorian tiles like these easily soak up paint splashes, I knew it would take a thorough clean to remove them completely. I firstly soaked the floor with water and left it to dry slightly before mixing a concoction of Tile Doctor NanoTech HBU, Tile Doctor Pro-Clean, and Tile Doctor Remove and Go.

NanoTech HBU is a particularly powerful cleaner which uses nano-sized particles to penetrate the pores of the stone, while Pro-Clean is an alkaline-based cleaner that tackles heavy soil build-up. Remove and Go is a multi-purpose product which both cleans and strips away any old sealer.

I left this mixture to dwell on the floor for around half an hour, scrubbed it in firstly using a black scrubbing pad fitted to a rotary machine and then a wire wool pad. I followed by rinsing the products off with water and extracted up the excess with a wet vacuum machine.

This technique was repeated until I was satisfied with the condition of the floor.

Sealing an Original Victorian Tiled Floor

After leaving the floor to dry off completely overnight, I returned to the property the next day to carry out the sealing process. I applied seven coats of Tile Doctor Seal and Go, which not only adds a protective covering to the tile, but also enhances its appearance.

The customer was absolutely thrilled with the results of the restoration, especially considering that she was told the floor was ruined by a leading company and not worth saving.

Victorian Tiled Hallway in Cardiff After Restoration

I think you will agree that its always worth trying to restore a period floor and my customer deserves praise for sticking to their guns.

Professional Period Victorian Hallway Floor Restoration in South Wales

Original Victorian Tiled Hallway Thought Beyond Repair Rejuvenated in Cardiff Read More »

Victorian Hallway Tiles Before and After Repair in Newport

Specialist Repair of a Damaged Victorian Tiled Hallway in Newport

1 Comment / Caerphilly Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

Newport is the third largest city in Wales with a long history that goes back to the Roman times so un-surprisingly it has many period buildings and problematic tiled floors. I was recently asked by a Tile Doctor colleague of mine to assist him with the restoration of an original Victorian tiled hallway at a property in the city.

You will see from my website that I have a lot of experience in rebuilding Victorian tiled floors and on this occasion my colleague required me to perform some specialist tile repairs before he could carry out the business of cleaning and sealing the floor.

The property owner had previously asked a different company in to carry out the floor restoration but the tile repairs made were disastrous. The repair attempts were never going to be successful as this was a particularly difficult situation and required real specialism in dealing with Victorian tiles.

Victorian Hallway Tiles Before Repair in Newport

The previous company had used dry plaster to bed the tiles in the hope of being able to achieve some sort of flatness to dry cut the pieces in place. This had also been done without consideration for matching the colours of the tiles. You can see the result of this in the photo below.

Victorian Hallway Tiles During Removal Showing Plaster Base in Newport

Repairing a Victorian Tiled Hallway

The first stage of the repairs was to remove all the plaster powder and cut out the very damaged tiles as far back as possible, being very careful not to cause any further damage to the existing tiles. Next, I cemented the base level to the desired thickness and left it to dry out, before dry cutting all the tiles (150 x 150) I had sourced to colour match with the original tiles.

Victorian Hallway Tiles During Base Rebuild with Cement Newport

Victorian Hallway Tiles Cutting Replacements in Newport

Once all the tiles were cut, I moved them to the area to be tiled and proceeded to spread adhesive and install the tiles. Following this, I left the floor to dry out overnight. The next day, I returned to the property and grouted the tiles.

Victorian Hallway Tiles During Replacement in Newport

Now that the repairs have been completed to the required standards, this Victorian tiled hallway is now ready to be cleaned and sealed by my colleague.

Victorian Hallway Tiles Grouting in Replacement Tiles in Newport

Damaged Victorian Hallway Floor Repair and Restoration in South Wales

Specialist Repair of a Damaged Victorian Tiled Hallway in Newport Read More »

Victorian Hallway Floor Blackwood Before and After Restoration

100+ Year Old Victorian Tiled Hallway Restored to New in Blackwood

1 Comment / Abercynon Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This Victorian tiled hallway floor, located in a property in Blackwood, South Wales, was in a bad way. It was suffering from several broken and missing tiles, and the entire floor looked like it had not experienced a good clean and fresh seal in several years. The property itself dated back to 1905, and it’s very likely that the Victorian tiles are original.

However, the property owner was very hopeful that the hallway could be rejuvenated, so he contacted me to carry out the work. Upon my first inspection of the floor, I could immediately see that a lot of tile replacements would need to be carried out.

I suggested to the customer that I repurpose the tiles that surrounded the matt well at the front of the door to use as replacements for the tiles that were broken and damaged. I would then create a new, larger matt well while using original tiles to fix the damaged areas. It’s a technique I’ve used before so I was confident it would work.

He was happy with this suggestion so I agreed to return later that week to complete the restoration.

Victorian Hallway Floor Blackwood Before Repair

Repairing and Cleaning an Original Victorian Tiled Hallway

My first task was to carefully remove the tiles around the exiting matt well, clean off the cement, and, in some cases, skim the thickness off some tiles so that they would position flat against the adjacent tile. Next, I proceeded to fix these replacement tiles in the areas required.

After completing these repairs, I moved on to cleaning the entire hallway. First, I manually scraped off as much of the paint and cement deposits from the surface of the tiles as possible, before cleaning the floor thoroughly with a mixed solution of three products: Tile Doctor Pro Clean, Tile Doctor NanoTech HBU Remover, and Tile Doctor Remove and Go.

Each of these products serves a different purpose. Pro Clean is reliable and powerful alkaline tile cleaner, while NanoTech HBU is a powerful cleaner which uses nano-sized particles to penetrate the pores of the tile and dissolve ingrained dirt and stains. Remove and Go strips away any old sealers, along with any of the stubborn paint and cement deposits.

The solution was left to dwell on the floor for about half an hour, before I scrubbed it into the stone by hand using a coarse black scrubbing pad. The floor was then rinsed thoroughly, before Tile Doctor Grout Clean-Up was applied using a wire wool pad remove light grout smears (grout haze) and signs of efflorescence.

I then completed the grouting of the floor left it to dry for half an hour before giving it a final wipe with a sponge.

Victorian Hallway Floor Blackwood During Restoration

Sealing a Victorian Tiled Hallway

After leaving the floor to dry out overnight, I returned to the property the following morning. I ran some quick checks for moisture to see if the tiles were ready to be sealed.

Thankfully, the floor proved dry and I could proceed the applying Tile Doctor Seal and Go. This sealer works really well on Victorian tiles and provides a nice subtle sheen finish whilst providing stain resistance.

The customer had initially thought the floor could not be salvaged, but now he will be able to enjoy this fantastic original feature from years to come. It just goes to show that a bit of creativity and hard work really can make a difference.

Victorian Hallway Floor Blackwood After Restoration

Professional Victorian Tiled Hallway Restoration in South Wales

100+ Year Old Victorian Tiled Hallway Restored to New in Blackwood Read More »

Victorian Hallway Penarth Before and After Restoration

Victorian Tiled Hallway Floor Restored in Penarth

1 Comment / Cardiff Tile Cleaning, Penarth Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This Victorian tiled hallway floor at a house in Penarth needed a deep clean and seal but also there was the added complication of what to do with the under stairs area as you will see in the photographs below. There were many options to consider and after many visits to the property to discuss various options we finally decided on adding new replacement tiles that complimented the main colour in the floor.

Victorian Hallway Penarth Before Restoration

This floor was in quite a bad state covered in paint splashes and cement after new damp proofing also under the staircase there were no tiles just cement which the customer hoped could be tiled. I assured the customer that they made the right choice by contacting Tile Doctor that they would be very happy with the outcome of their project.

Repairing a Victorian Tiled Hallway Floor

Using a Kango hammer I first removed all the cement from area under the stairs that was to be retiled to get the main mess out of way then scraped off as much cement and paint off the tiled surface as possible. Once this was done and the area clear I was able to re-cement the area to be tilled to the right level and once dry tile the area with tiles in the chosen colour from a company known as Original Style which produce good tile replicas.

Victorian Hallway Penarth During Restoration

Deep Cleaning Victorian Hallway Floor Tiles

The floor was checked for moisture which proved dry and then cleaned with a mixture of Tile Doctor products including NanoTech HBU Remover (HBU stands for Heavy Build-up), Remove and Go to tackle the paint splashes and to ensure any sealers were removed and Pro-Clean which is another powerful cleaning product. All these products are safe to use on tiles floors and were worked into the tile and grout using a scrubbing pad fitted to a rotary machine.

Once the floor was clean the soiled cleaning solution was extracted from the floor using a wet vacuum and the floor then thoroughly rinsed down with water, again extracted using a wet vacuum. Problem areas were re-treated by hand and scraped using wire wool and Tile Doctor Grout Clean-up which is an acid product designed to remove cement stains and grout smears. The floor was then rinsed again to remove any product traces, dried as much as possible with the wet vacuum and left to dry off overnight.

Sealing a Victorian Floor Sealing

I came back the next day to seal the floor, checking the tiles for moisture first using a damp meter. To seal the tiles, I used Tile Doctor Seal and Go which adds that protective layer and a nice sheen to the floor.

Victorian Hallway Penarth After Restoration

The replacement tiles blended in well with the original Victorian floor tiles which now following the deep clean and re-seal looks like a new installation.

Restoring a Victorian Tiled floor hidden in South Wales

Victorian Tiled Hallway Floor Restored in Penarth Read More »

Victorian Tiled Hallway Before and After Cleaning Maesteg

Deep Cleaning and Sealing to Restore Original Victorian Tiles in Maesteg

1 Comment / Rhondda Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

The owners of this property in Maesteg, a town in the Llynfi Valley not too far from Port Talbot, had decided after many years to remove the carpet covering the downstairs hallway. Upon doing so they revealed some truly fantastic patterned Victorian tiles, and decided that instead of replacing the old carpet with new carpet, they would restore the condition of the original flooring.

Victorian tiled hallway before cleaning Maesteg

Whenever you remove carpet that has been hiding tiled flooring, it’s almost inevitable that you will find traces of rubber underlay, glue and cement deposits, and paint stains – or, in this particular case – a combination of all the above. The best course of action to bring original tiles back to their peak condition is to seek professional restoration. Everyday cleaning products and DIY methods rarely achieve the desired result. As the local Tile Doctor, these property owners contacted me to get the job done efficiently and effectively. Here’s how I did it.

Cleaning an Old Victorian Tiled Hallway Floor

Upon arriving at the property, I started by checking the floor for any inherent moisture problems. This was important to do considering that the tiles appeared quite old; thankfully there were no major issues that would have affected the restoration.

After checking for moisture, I began the cleaning process by manually scrapping off as much of the heavy glue and cement deposits as possible to clear the area and give the cleaning products an easier time of penetrating deep into the tiles.

I then mixed a strong cleaning solution consisting of three of our products: Tile Doctor Pro Clean, Remove and Go and NanoTech HBU. Pro Clean is a reliable cleaner that cans be used on most natural stone floors, Remove & Go helps with the removal of glues, adhesives, and old sealers, and NanoTech HBU uses nano-sized cleaning particles to penetrate beneath tough stains, dissolve them, and lift them out.

This solution was worked into the tiles using a rotary machine fitted with a coarse black pad, before I rinsed the floor thoroughly. Then, on my hand and knees, I carefully checked every tile for any additional paint splashes or other deposits, using a handheld scraper and wire wool in combination with Tile Doctor Grout Clean Up to remove any I came across. This cleaning method for this type of floor is generally always successful.

Sealing a Victorian Tiled Hallway Floor

After leaving the floor to dry overnight I returned to the property, once again checking for moisture. Happy that the floor was ready to be sealed, I applied six coats of Tile Doctor Seal and Go, which not only provides a protective layer but also gives the tiles to a beautiful low sheen finish. Seal and Go is best suited for use on internal, porous surfaces such as Victorian, Quarry, Sandstone and Slate.

The two photos below show the outcome of the restoration. The transformation achieved in the space of one day was exceptional and needless to say the customer was over the moon with their new Victorian tiles.

Victorian tiled hallway after cleaning Maesteg

Professional Victorian Tiled Hallway Restoration in South Wales

Deep Cleaning and Sealing to Restore Original Victorian Tiles in Maesteg Read More »

Victorian Tiled Lobby Floor Before and After Restoration Swansea

Quarry and Victorian Tiles Repaired, Cleaned and Sealed in Swansea

1 Comment / Quarry Tile Cleaning, Rhondda Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

The owner of this property in Swansea contacted me recently about a two-part job that would involve the restoration of both a Quarry tiled hallway and a Victorian tiled lobby. The property itself dates back to 1918 – making it nearly a century old – and its safe to assume that both sets of tiles are of a similar age. As you can see from the photographs, they had certainly had absorbed a lot of wear and tear over the years, and as these tiles get older it becomes in increasingly difficult to maintain their appearance.

Cleaning a Quarry Tiled Hallway

A number of the Quarry tiles had at some point in the past been removed to allow the installation of electrical cables below ground, with an unsightly layer of cement left in their place. At a later point I would need to replace these tiles, but initially I needed to remove the old cement, along with any old sealer remaining on the floor by applying and scrubbing in Tile Doctor Remove & Go.

Quarry Tiled Floor Before Restoration Swansea

Next, I applied an undiluted solution of Tile Doctor Pro Clean, our effective alkaline tile cleaner, to break down and remove the ingrained dirt. I then rinsed with clean water, and removed the resulting slurry with a wet vacuum. With the floor freshly cleaned, I proceeded to retile the area where tiles were missing.

Cleaning a Victorian Tiled Lobby

The Victorian tiles in the porch/lobby room area were adjoined to the Quarry tiles. In this area there were several loose tiles, and I opted to recement and regrout them before beginning a clean.

Following this the tiles were treated to a thorough clean in a similar fashion to that provided to the Quarry tiles, however, in this case I mixed Remove and Go and Pro Clean to form a powerful cleaning solution. This was applied to the floor, left to dwell for a short period, and then scrubbed into the tiles, quickly bringing them back to life. I then lightly steamed cleaned the floor with a Karcher tool to eliminate or neutralise any chemicals that remained.

Victorian-Tiled-Lobby-Floor-During-Restoration-Swansea-114646

Sealing Quarry and Victorian Tiles

I left the two sets of tiles to dry out fully overnight. Upon my return to the property, I ran damp tests to confirm that the floors were ready to be sealed. The customer had asked for a satin finish on both floors, so I decided to use Tile Doctor Seal and Go. This topical sealer provides a durable sheen seal, and is a cost-effective option for Quarry and Victorian tiles. I applied seven coats of Seal and Go in total across both sets of tiles.

Quarry-Tiled-Floor-After-Restoration-Swansea-112352

Victorian-Tiled-Lobby-Floor-After-Restoration-Swansea-112433

The customer and myself were delighted with the results. In the space of just a couple of days these classic tiles have been brought been completely revitalised, and thanks to the application of a fresh sealer will be easier for the customer to keep clean going forward.

Restoration of an Old Quarry Tiled Hallway and Victorian Tiled Lobby in South Wales

Quarry and Victorian Tiles Repaired, Cleaned and Sealed in Swansea Read More »

Heavily Soiled and Damaged Victorian Tiled Hallway Restored in Pontcanna

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

Pontcanna is a popular residential area in the western district of Cardiff, in South East Wales. Known for its rather large houses and spectacular foliage, interestingly enough roughly a quarter of the population are English folk.

I was called down to a property in the area to take a look at a Victorian tiled floor which was in quite poor condition. Along with the typical amount of dirt and muck seen on poorly maintained tiles, there were a number of missing tiles and a fair bit of cement caked on the surface of the floor.

It would require a robust clean, fresh seal, and several repairs to get this floor back into optimum condition.

Cleaning and Repairing a Dirty Victorian Tiled Floor

To begin, I checked for excess moisture problems using a damp meter in various places of the hallway floor and, thankfully, it was showing dry results. Any dampness could have potentially caused problems later on in the restoration process, so it was s good idea to run tests before starting.

Next, I manually scraped as much of the dry paint and cement off the tiles as possible, with no lubrication necessary. I then proceeded to clean the floor with a solution I mixed early, consisting of equal parts Tile Doctor NanoTech HBU and Tile Doctor Pro Clean, rinsing as I went. Both products are designed to tackle heavy soil build-up, with the former uniquely using nano-sized particles (as the product name suggests) to penetrate deep into difficult to reach areas in the tiles in order to lift out ingrained muck.

Following the initial clean, I removed all of the loose tiles and those heavily affected by cement, before retiling as necessary with fresh Victorian tiles, and grouting the whole floor. Of course, these replacement tiles were carefully sourced to ensure consistency, as far as possible, with the original pattern of the floor.

The next day, I went over the whole floor with an application of the acid-based Tile Doctor Grout Clean Up, diluted with a little alkaline Pro Clean to form a cleaning solution. I then used a black pad to scrub the cleaner into the tiles, similarly to the previous day’s cleaning. This was followed by a through rinse with water to neutralise the floor.

It was at this point that I noticed some stubborn cement stains remained so I set about breaking them down using a 60 grade hand held diamond polishing block, and this technique proved successful.

Sealing a Victorian Tiled Floor

After completing the clean, I left the floor to dry out for roughly 24 hours. Upon my return to the property to seal the tiles, I tested again for moisture. It is recommended to run damp tests before sealing, as excess moisture can cloud the sealer, affecting its performance in the long run.

Fortunately, no dampness was detected and I was proceeded to seal the floor with seven coats of Tile Doctor Seal & Go, which enhances the natural colours in the stone and provides a nice satin gloss appearance, as requested by the customer.

I was extremely pleased with the results of this restoration, as was the customer. The extent of the soil build up and damage was such before the restoration that, after completion, the floor looked like it had been newly laid!

Victorian Tiled Floor Restoration in South Wales

Heavily Soiled and Damaged Victorian Tiled Hallway Restored in Pontcanna Read More »

Victorian Chequer Tiled Hallway Floor Deep Cleaned in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

Sometimes you survey a job and you know that if you get the chance to restore it the results will be totally fantastic! This was the case with this Victorian black & white chequer tiled floor in the hallway of a large terraced Victorian house in Cardiff which dated back to around 1900 and was now looking well past its best, I know this because my family used to live in the house opposite. It was a well laid floor with no readings of dampness; I believe it’s imperative you check a floor for dampness before starting so you know what the baseline damp level is and which sealers will work with the floor.

Black and white chequer Victorian Tiles Cardiff Before

Deep Cleaning a Victorian Tiled Floor

My first action was to hoover the floor and then scrape as much debris off the surface as possible, and then as always I mixed 50/50 Tile Doctor HBU (Heavy Build-Up) remover with Pro-Clean and on this occasion because I wanted the white tiles to become really white I added the same amount of Tile Doctor Grout Clean-Up. This special recipe created a very formidable and strong cleaning solution which is what the job called for. I swept it over the whole floor letting it soak in for about ten minutes and then worked it into the floor using a scrubbing machine fitted with a coarse black pad adding more of the solution to the floor where it was drying out as I went.

Black and white chequer Victorian Tiles Cardiff During Cleaning

The next step was to rinse the floor twice with water and extract the now filthy cleaning solution using a wet vacuum. At this point I inspected the tiles and I could see there were still a few stubborn areas with spots of paint and glue which I addressed with a decorators steam plate together with a scraper and hand held scrubbing pad.

I was now happy that the floor was clean and ready to be sealed, before sealing though it’s important to remove any trace of cleaning solution as it may contaminate the sealer so I gave the floor a thorough rinse and extracted as much of the water as possible to reduce drying times.

Sealing a Victorian Floor Sealing

I left the floor to dry for 48hrs before coming back to seal the tiles taking a reader on my damp meter first to establish they had indeed dried out. To seal the floor I used eight coats of Tile Doctor Seal & Go which really works well on Victorian tiles and in this case made the whites really stand out.

The customer wanted this floor to look good because they were selling the property and were due to have an open day. The clean tiles really gave the house the wow factor and period features are so desirable these days so I don’t think it will take long to sell.

Victorian Tiled floor restored in South Wales

Victorian Chequer Tiled Hallway Floor Deep Cleaned in Cardiff Read More »

1920’s Victorian Tiled Hallway Floor Restored in Pontcana

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

The new owner of this house in Pontcana, Cardiff recently discovered a 1920’s Victorian tiled floor hidden under carpet in the hallway and was keen to restore it as an original feature. They contacted Tile Doctor to have it repaired and I popped round to do a survey. I could see there was a great deal of movement in the floor by the front door area where the old brittle cement base had buckled causing the tiles to become loose and uneven.

Victorian Tiled Floor Pontcana Before Repairs

Most contractors would consider this beyond repair however I suggested we take up the main area of buckled tiles and keep them for the repair to the centre of the hallway where a copper strip had been laid in the cement. I suggested that in the area which we lifted up the tiles by the front door that we made a mat well which not only looks good but serves a purpose and remedies the main problem of the cement base.

Repairing a Victorian Tiled Hallway Floor

The first task was to check moisture readings then to remove the tiles carefully as I could in order to save the pieces for the repair of the other damage in the centre of floor. I then chiselled the raised areas of cement away with a small Kango hammer in preparation for the self-leveller which would be needed to make the base suitable for the new doorway mat.

Victorian Tiled Floor Pontcana Starting Repairs

Victorian Tiled Floor Pontcana Removing Damaged Section

Once this was done I proceeded to repair the other damaged parts of the floor using the original tiles that were now spare. I laid the tiles through the damaged areas and grouted them in.

Victorian Tiled Floor Pontcana During Grouting

Once the grout had gone off I was able to start cleaning the floor starting with an application of Grout Clean-Up to remove the grout smears followed by a solution of Tile Doctor HBU mixed 50/50 with Pro-Clean which was scrubbed into the tile and then rinsed off before steam cleaning the floor to make sure any dirt or trace of chemical was removed before sealing the tiles.

Victorian Tiled Floor Pontcana After Repairs

Sealing a Victorian Floor Sealing

The floor was left to dry out and I returned two days later to seal the floor checking that the moisture readings were acceptable first. To seal the floor I used six coats of Tile Doctor Seal and Go which can even make an old floor look vibrant.

The floor now looks great and I’m confident the restoration of this period feature will add value to the property.

Victorian Tiled floor hidden under carpet fully restored in South Wales

1920’s Victorian Tiled Hallway Floor Restored in Pontcana Read More »

Full Restoration of a Victorian Tiled Hallway Floor in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

Never give up is how I would describe this job!!! I initially surveyed the floor in this Cardiff kitchen in November 2014 and finally completed it and the end of February 2015 working on it off and on as I searched for right tiles to match the existing.

On my survey the Victorian tiled floor which the customer was hoping to restore was covered over by ceramic tiles which the customer agreed to remove before my next visit so I could carry out a cleaning sample. Additionally there was an area of flooring which needed to blend in with kitchen as the pantry wall that previously separated it had been knocked down.

The ceramic tiles were removed and I came round to carry out a cleaning sample in what I thought was one of the more heavily soiled areas; I used Tile Doctor Remove & Go combined with another Tile Doctor product called NanoTech HBU which stands for Heavy Build-up Remover. The results were successful and it was decided to go ahead with the restoration.

Full Victorian Floor Restoration Cardiff Exposing the tiles

During my visit I tested for moisture and in general the readings were good with the highest reading of 12 in different parts of the floor.

Fully Restoring a Victorian Tiled Floor

To restore the tiles I set about cleaning adhesive and grime off using a combination of Tile Doctor Nanotech HBU and Pro Clean which was left to dwell and soak in for two hours before scrubbing with a rotary machine fitted with a black scrubbing pad. I tried this for a while and found it was not removing the dirt as expected and on inspection I discovered that the inner body of the ceramic tile was still stuck to the floor. It seems the when the customer removed the ceramic tiles they had only managed to remove the top layer of the tile and had left the lower part stuck to the floor. This Job was now becoming a nightmare as the solution would be to chip and scrape away tiny pieces of the remaining tile away so I could reach and clean the original Victorian floor.

Full Victorian Floor Restoration Cardiff Scraping Off Adhesive

I had suggested to the customer that it might be cheaper to replace the whole floor but he was adamant that we should continue with our original plan and try to do the best job possible so never giving up I was happy to oblige.

In between cleaning the floor I prepared the base adjacent to the original floor with levelling compound. Also with the cleaning in progress I was getting a better look at the Victorian tiles which were now starting to appear and I could see how badly damaged which would have to be replaced.

Full Victorian Floor Restoration Cardiff Levelling Compound

Full Victorian Floor Restoration Cardiff laying replacement tiles

The hallway floor had to be cut at the kitchen doorway as it protruded into the kitchen which when the door was closed looked odd so the customer was happy with my suggestion. I made different suggestions for the new floor layout, and colours which we felt complimented each floor pattern , the new tiles were purchased from original style and the local reclamation yard but I did have to cut the back off a few because of different thickness.

Full Victorian Floor Restoration Cardiff Trimming reclaimed tiles

Full Victorian Floor Restoration Cardiff Laying new tiles

I finished fixing the replacement tiles and laying the new tiles in a pattern that we had agreed and in a style that best matched the original floor.

Full Victorian Floor Restoration Ready for sealing

Sealing a Victorian Floor Sealing

After all the work undertaken including the tilling of the area attached to the original I gave the whole floor a final and thorough steam clean which I did on a the Friday leaving it to thoroughly dry out over the weekend so I could move onto sealing early the following week.

Unfortunately when I arrived on Monday I discovered patches of efflorescence had appeared on certain tiles and I was still unable to finish the job. To resolve this the tiles needed to be given an wash down with Tile Doctor Grout Clean-up diluted 50/50 with water; this did the trick so I gave the floor another rinse with water and left to dry overnight.

When I returned the next day I checked for moisture which was a borderline reading of 15-16 so using a heat gun applied some warmth to the whole floor making sure to let it cool down before sealing with a coat of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the tile to prevent dirt from becoming ingrained there. Next I applied three coats of Tile Doctor Seal and Go which added a nice sheen to the floor and really brought out the vibrant reds in the tile. The following day I returned to do some tiling on wall above the cooker so applied a further three coats of Seal and Go to the floor to ensure it was fully sealed.

If you have read this story through to the end you will appreciate that this was a mammoth job however it was satisfying to do and the final result looks fantastic, needless to say both myself and the customer were very happy with the end result.

Victorian Tiled floor hidden under ceramic tiles fully restored in South Wales

Full Restoration of a Victorian Tiled Hallway Floor in Cardiff Read More »

Victorian Tiled Floor Renovation Port Talbot After

Damaged Victorian Tiled Hallway Refurbished in Port Talbot

1 Comment / Cowbridge Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

A customer in Port Talbot discovered an original but damaged Victorian Tiled Floor, circa 1890, hidden under laminate flooring in their hallway and were keen to restore it back to its original condition. They trawled the Internet and discovered Tile Doctor, made contact and a visit was arranged to conduct a survey.

The Victorian floor tiles were in a poor condition and to make matters worse a central heating pipe had been laid through the width of the hallway floor destroying the Victorian tiles. I assured the owners something could be done and we made a booking for me to return and do the work; in the meantime I spent a considerable amount of time sourcing tiles with the right measurements to replicate the original. Fortunately I managed to find a close match with a tile supplier called Original Style.

Victorian Tiled Floor Renovation Port Talbot Before

Restoring Victorian Floor Tiles

My first task was as always to check for moisture then to scrape as much adhesive and paint off the tiles as possible; then resorting to a chisel and small jackhammer tool around all the edges of the area to be replaced to remove any more badly damaged tiles.

Victorian Tiled Floor Renovation Port Talbot During

I could see from the start I was going to need all the assistance I could get to clean this floor and lifts the stains out so to deep clean the tiles I applied Tile Doctor Remove and Go mixed 50/50 with NanoTech UltraClean which adds fine abrasive particles to an already powerful coatings remover. I brushed the solution over the whole floor and then went over it with a rotary machine fitted with a black scrubbing pad. I then left it to soak in for at least an hour before going over it again with the machine. Next the floor was rinsed with water to remove the worst of the dirt and to enable further attention to be focused on the more stubborn stains. Further cleaning was required so I covered the tiles in Tile Doctor Pro Clean which is a strong alkaline cleaning product and then rinsed the floor again scrapping off any old paint and stubborn glue residue in the process.

The floor was looking much improved but there were still areas with light cement smears and deeply ingrained dirt so this time I applied Tile Doctor Grout Clean-up which is an acid based product so you can’t leave it on too long but it’s the only effective way to treat mineral type deposits. I wanted to be sure all this product was removed so afterwards the floor was rinsed three times using a wet vacuum to remove the water. Once I was satisfied the floor was clean I applied a levelling compound to the area damaged by the heating pipes for the new base so I could tile it the following day.

Repairing a Victorian Tiled Floor

On the second day I started by cutting larger tiles into small pieces as the tiles were only certain sizes available from the tile supplier, but the colour match was nearly perfect so I made do. Next I started to tile the area using a fast setting adhesive so I could grout the tiles the same day. Once everything had set I gave the rest of the floor a final steam clean to make sure there was no trace of chemical that could upset a sealer.

Sealing a Victorian Floor Sealing

I left the floor to dry out over the weekend and then came back on the Monday to seal the tiles with Tile Doctor Seal and Go which is ideal for this type of tile as it adds a nice shine. I applied three coats leaving and interval in-between so it could dry before applying the next coat.

The customer was delighted with the results and that she chose Tile Doctor to do the work, we were not the cheapest quote she had received but you have to admit the floor looks like new so well worth the money.

Victorian Tiled floor restored in South Wales

Damaged Victorian Tiled Hallway Refurbished in Port Talbot Read More »

Victorian Tiled Floor Discovered in Splot After

Old Victorian Tiled Hallway Floor Restored in Splott near Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

After removing the hallway carpet the new householders had discovered a Victorian tiled floor and being keen to restore it as an original feature made contact with Tile Doctor. Restoring original features can add a lot a value to a house so it’s well worth pursuing.

Victorian Tiled Floor Hidden Under Carpet in Splot

Restoring a Victorian Tiled Floor

The floor actually caught me out because on initial visit I’d made my judgement on a small area by the doorway which had been uncovered. After removing the rest of the floor covering however I could see the floor was in an extremely poor condition especially around the perimeter which had ingrained dirt and cement, old paint and was generally well worn. I would estimate the floor was original from at least 120 years ago

Before starting any cleaning I put the damp meter reader on several tiles to check the damp levels which read border line .15 -.17 in places which I was not very happy with especially as the weather we’ve had recently had been hot and dry in Cardiff for some time. Undeterred I scrapped the whole floor and then chiselled the edges with Hammer and bolster; next I mixed a 50:50 batch of Tile Doctor Remove and Go with NanoTech Ultra-Clean cleaner and applied this to the whole area, agitated it with a black pad fitted to a rotary machine and left it to dwell on the tile for half an hour so it could work on any old sealers that may have been present on the tile.

I then rinsed the floor twice and although the floor was looking better I could really see how bad the condition was so next I applied undiluted Tile Doctor Pro-Clean to the whole floor which is a strong alkaline cleaner. It was left to dwell on the floor for half an hour scrubbing in between, rinsing with clean water as I carried on.

Although improved again I was still not happy with the results especially the borders as there appeared to be dark cement stains deeply ingrained into the tiles which no doubt had been there for eighty years. So next step was to apply Tile Doctor Grout Clean-up which is designed to remove mineral deposits and cement, it’s very effective solution for this type of work and it removed most of the stains but not all.

The floor still needed more work so in my frustration I rinsed the floor and mixed a concoction of Remove and Go, Pro-Clean and Grout Clean-up together with a squirt of the NanoTech Ultra-Clean cleaner and spread it over the whole area leaving it to dwell for around 10 minutes before scrubbing it again. The floor was then rinsed and then for the final clean I steam cleaned the area twice rinsing in-between.

Victorian Tiled Floor Discovered in Splot Before

Sealing a Victorian Floor Sealing

The cleaning was done on a Friday and then left to dry out over the weekend. I returned on Monday and tested for moisture which was slightly high in places so being ever over precautions dried the whole floor with a heat gun until it gave me an absolute dry meter reading.

I left the floor to cool down to ambient temperature and then sealed it with three coats of Tile Doctor Seal and Go. The customer was over the moon and I think you will agree that the tiles have been renovated to a high standard.

Victorian Tiled floor Restored in Splott, South Wales

Old Victorian Tiled Hallway Floor Restored in Splott near Cardiff Read More »

White Victorian Floor Tiles Penarth After

Starburst Victorian Tiled Hallway Floor Cleaned in Penarth

1 Comment / Cardiff Tile Cleaning, Penarth Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This Black and White Victorian Tiled hallway floor laid in a “Starburst” pattern at a house in Penarth which had been previous restored in 2011 by another Tile Doctor however the house had recently been subject to some renovations and unfortunately the builders did not cover the hallway floor (typical) so the floor was looking rather tired when I came round to take a look. Whilst I was there I took a damp meter reading which showed the floor to be bone dry which given the hot weather was to be expected; a dry floor and hot weather works in our favour as restoring a tiled or stone floor in hot weather is much more efficient as everything dry’s so quickly.

White Victorian Floor Tiles Penarth Before

Cleaning a Victorian Tiled Floor

My first job was to apply masking tape to the Slate step at the front doorway as the customer was very proud of it and I certainly didn’t want to get any Tile Doctor Remove and Go on it which would of stripped of the sealer. I then cut out a few tiles which were to be replaced before cleaning the whole floor with a dilution of Tile Doctor Remove and Go mixed 50/50 with NanoTech UltraClean to make it more effective. The solution was left to dwell for around ten minutes before being scrubbed into the tiles using a rotary machine fitted with a black coarse pad.

This process not only removed any previous sealer but really thoroughly cleaned the tiles as the small abrasive particles in the NanoTech UltraClean gave the floor a light abrasive deep clean. I should mention that during the cleaning stages I rinse the floor at least four times with clean water and then steam clean the whole floor to open up the pores to ensure that there is no cleaning agents present. I then give the floor a final rinse using a wet vacuuming to remove the water and make the floor as dry as possible prior to sealing. Before leaving for the day I carefully fitted the replacement tiles.

Sealing a Victorian Floor Sealing

I cleaned the floor on Friday so it was left to dry out over the weekend coming back on Monday to ensure it was dry and then sealing it with multiple coats of Tile Doctor Seal and Go which works very well on Victorian floor tiles as it gives a nice satin sheen as well as providing stain protection.

Black and White Victorian Tiled floor restored in South Wales

Starburst Victorian Tiled Hallway Floor Cleaned in Penarth Read More »

Victorian Tile Issue Resolved in Gwent After

Victorian Tiled Hallway Floor Problems resolved in Gwent

1 Comment / Caerphilly Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This particular Victorian tiled floor had been installed in the hallway of a house in Stow Park, Gwent around 130 years ago. Despite its age it was in a good condition and the detailed pattern although dirty was still very distinctive, the customer felt however that the floor was spoilt by the total erosion of the stone step at the front door which had suffered from the 130 years of footfall that had occurred across the threshold.

Victorian Tile Issue Resolved in Gwent Before

They asked me for any suggestions to make it more pleasing on the eye so I chose various colours from the main floor area and created a new entrance step leading to the main hallway comprising of 150 mm x 150 mm original style red and black floor tiles and 150 mm x 75 mm original style black round edge tiles.

Cleaning a Victorian Tiled Floor

The difference between the old and new was fairly obvious so once the tiles had been laid and the grout had gone off I returned to give the original Victorian tiles a thorough clean. There were some stubborn stains on the floor so I decided to scrub in a couple of strong products called Tile Doctor Remove and Go followed by Tile doctor Grout Clean-up rinsing in between the stages.

Remove and Go is a sealer and coatings remover that as well as cleaning will remove old coatings such as sealers from the tile, this is important if you wish to re-seal the floor as you can get unexpected results if you add one sealer on top of another. Grout Clean-up removes mineral deposits such as the white salts from effloresce, rust and grout smears. The floor was given a thorough rinse following the cleaning process to ensure no product was left on the floor that could upset a sealer.

Sealing a Victorian Floor Sealing

Aided by the warm weather it wasn’t long before the tiles were dry enough to be sealed and so I applied two coats of Tile Doctor Seal and Go which adds a nice subtle sheen to the floor as well as providing on-going stain protection.

Victorian Tile Issue Resolved in Gwent After Sealing

I think you would have to agree my solution worked out well and the new tiles look part of the original floor.

Victorian Tiled floor problems resolved in South Wales

Victorian Tiled Hallway Floor Problems resolved in Gwent Read More »

Victorian Floor After Cleaning in Cardiff

Victorian Tiled Hallway Floor Cleaned in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This owner of this house built around 1900 in Cardiff had asked me if I could make their look any better following their attempt at renovating their original Victorian Tiled floor. I examined the floor and established that they had sealed the floor without testing for moisture also it seemed it had been sealed but not correctly cleaned and more importantly not rinsed thoroughly to eradicate any cleaning solutions first; the results as you can see has caused a terrible patchy mess .

Victorian Floor Before Cleaning in Cardiff

Cleaning a Victorian Tiled Floor

The floor was tested for moisture first which established it was dry and also established a baseline as to what to look for later. The next step was to remove any sealers present which proved very difficult because the sealer had only been applied 6 months earlier and applied thickly with a roller. I used three litres of Tile Doctor Remove and Go in total to strip 6 m2 applying it, letting it soak in and then scrubbing it in to get the sealer off. It took multiple rounds of scrubbing but once the sealer was removed I then went over the floor with Tile Doctor Grout Clean-Up to remove any grout smears and mineral deposits and then gave the floor a thorough rinse with plenty of clean water. To make sure I had given the floor a thorough clean the floor was then finished off more Remove and Go mixed with Tile Doctor NanoTech Ultra-Clean to make it more effective and then steam cleaned. The floor was then rinsed again with another two rinses with fresh cold clean water which was then removed with a wet vacuum I worked.

Sealing a Victorian Floor Sealing

The floor was left to dry out and I came back on two occasions to check if it was dry enough to seal. The first time I visited was three days later and the floor had a high moisture level, I tested again after five days and the readings were ok to carry on with the sealing stage. The customer wanted a satin finish so I went ahead and sealed the floor with several coats of Tile Doctor Seal and Go with great results as you can see.

Victorian Tiled floor restored in South Wales

Victorian Tiled Hallway Floor Cleaned in Cardiff Read More »

Abused Victorian Floor Cardiff Completed

Abused Victorian Tiled Hallway Repaired and Refurbished in Cardiff

1 Comment / Cardiff Tile Cleaning, Victorian Tile Cleaning, Work History / Julian Iancono

This is an original Victorian tiled hallway floor in Cardiff that dated back to when the house was built in the year of 1890. The previous householders of which had a radiator installed serviced by laying pipes right through the middle of the floor destroying the tiles as they went, they then back filled the channel with cement. On top of that many of the other tiles had been splashed with cement and paint.

Repairing Victorian Floor Tiles

My first job was to carefully remove the cement from the channel and to precisely cut back any old cement bedding and old cement grout away from any tile edges in preparation for the replacement tiles which fortunately I was able to get hold of.

After all the previous preparation I started carefully scraping off cement from all around the edges of the remaining tiles as well as gloss and emulsion splashes from the surface essentially giving the whole floor a thorough scrape with a hand held scraper vacuuming up the mess as I worked. Interestingly for a floor of its age I tested the floor in various places for moisture and found it to be perfectly dry.

Cleaning a Victorian Floor

To clean the floor I mixed three parts Tile Doctor Remove and Go with NanoTech UltraClean which basically adds small abrasive particles to a powerful sealer and coatings remover making it even more effective. This was applied to the whole floor and left to soak in for an hour making sure not to let it dry out by applying further amounts; leaving it to dwell for an hour gives it time to eat away at any dirt and coatings on the tile making the scrubbing processes easier.

To scrub the tiles I used a rotary machine fitted with a black scrubbing pad rinsing and extracting the soiled solution along the way. This cleaned up the tiles well however there were still some cement stains so this time Tile Doctor Grout Clean-up was applied to the floor in sections and left to ten minutes to dwell before working it in with another black scrubbing pad and rinsing off. This product is acid based so you can’t leave on the tiles for too long; once I was happy with the final result the whole floor was given a thorough rinse with plenty of clean water using a wet vacuum to extract the waste and dry the floor.

The channel was then filled with cement and once it had set replacement replica Victorian tiles from The Original Tile Company were installed. I then grouted the floor in a medium grey grout let the tiles become solid and the grout go hard before using a steam cleaner to make sure that I have removed all the tile doctor cleaning solutions prior to sealing.

Sealing a Victorian Floor Sealing

The customer wanted a semi-gloss finish so once I had tested the floor again to make sure it was dry I sealed the tiles with Tile Doctor Seal and Go which enhanced the colour of the floor tiles and added a nice sheen.

As you can see the new tiles fitted beautifully and the old floor tiles cleaned up so successfully the difference is impossible to spot. It was a lot of painstaking work though taking five days to finish but well worth the result.

Victorian Tiled floor restored in South Wales

Abused Victorian Tiled Hallway Repaired and Refurbished in Cardiff Read More »

=================================

Abercynon Tile Cleaning, Abergavenny Tile Cleaning, Barry Tile Cleaning, Caerphilly Tile Cleaning, Cardiff Tile Cleaning, Ceramic Tile Cleaning, Chepstow Tile Cleaning, Cowbridge Tile Cleaning, Encaustic Cement Tile Cleaning, Fireplace Cleaning, Flagstone Tile Cleaning, Grout Cleaning, Limestone Tile Cleaning and Polishing, Llantwit Major Tile Cleaning, Marble Tile Cleaning, Merthyr Tydfil Tile Cleaning, Penarth Tile Cleaning, Pontypool Tile Cleaning, Pontypridd Tile Cleaning, Porcelain Tile Cleaning, Quarry Tile Cleaning, Rhondda Tile Cleaning, Sandstone Tile Cleaning, Slate Tile Cleaning, Terracotta Tile Cleaning, Terrazzo Floor Cleaning, Travertine Tile Cleaning, Victorian Tile Cleaning, Vinyl Tile Cleaning, Work by Category, Work by Location, Work History / Julian Iancono

South East Wales Tile Doctor

================================= Read More »