A homeowner from Cardiff was in touch earlier this year regarding their 1930’s Geometric tiled floor more commonly referred to a Victorian. These floors are created using encaustic cement tiles benefit greatly from being sealed to prevent dirt from becoming ingrained in the tile and in this case the sealer had worn off some years ago.
I paid a visit to the property to survey the floor and come up with a restoration plan and produce a quote for work. It was clear that the floor had seen many years of heavy foot traffic since it had been last renovated and now you could see black staining building up on the tile. This had not gone unnoticed by the owner and wanted the floor restoring to its former glory.
I worked out a quote which was accepted and we agreed a date for the work to start.
Deep Cleaning a Victorian Tiled Hallway Floor
To get the floor clean I created a 50:50 solution of two Tile Doctor products, Pro-Clean and Nanotech HBU Remover. The two products combine to create a very powerful alkaline tile cleaning product. The solution was applied neat to approximately one square meter at a time and after leaving it to soak for ten minutes it was worked in using a hand size scrubbing pad cut from a Black 17-inch floor pad.
This is an aggressive pad which helps shift the dirt with the help of the products which penetrate the pores of the tile to lift out the ingrained dirt. After working on the area for around five to ten minutes at a time it was rinsed with water and the soiling extracted with a wet vacuum.
The next step was to repeat the process using Grout Clean-up which is an acidic cleaning product that helps to further clean up the tiles, removing old cement residues and will dissolve any efflorescent salts that may be present in the floor. After another rise and extraction, I was able to move on to the next square meter.
Hallways lend themselves well to this approach as you can start at one end and progress down the floor, working in this manner also ensures each meter is checked and any issues are resolved as you progress.
One the whole floor had been cleaned in this way it was left to dry off overnight.
Sealing a Victorian Tiled Hallway Floor
The following day I returned and first used the damp meter to check that the floor was dry enough to seal. Satisfied with the results I began with the application of the first coat of sealer which for this floor we used Tile Doctor Seal and Go. This sealer provides a satin shine finish which also enhances the deep vibrant colours of the tiles.
The customer was delighted with the results so much that they asked me to return later to restore the Red Quarry tiled floor in there dining room. Before leaving I took time to discuss aftercare cleaning for which I recommended the use of Tile Doctor Neutral Tile Cleaner, this is a gentle but effective tile cleaning product designed for use on sealed floors that will ensure easy maintenance and keep the floor in great condition.
When cleaning floor tiles with a mop we recommend using two buckets, one containing a neutral pH cleaning fluid such as Tile Doctor Neutral Tile Cleaner or Stone Soap and the second where you rinse your mop afterwards, otherwise you will contaminate your cleaning fluid with dirt every time you rinse.