Badly Stained Quarry Tiles Deep Cleaned and Sealed in Splott

These Quarry tiles at a house in Splott, a small town not too far from the city of Cardiff, had certainly endured a hammering after what appeared to be recent decoration in the room. The tiles were heavily soiled, with sand and cement mixed up and splattered across the floor, along with deep paint and plaster stains.

Quarry Tiles Before Restoration in Splott Cardiff
Quarry Tiles Before Restoration in Splott Cardiff

The customer had already scraped off as much of the cement and other stubborn stains off – as much as they could, at least. Quarry may be typically hard wearing, but this doesn’t necessarily mean it’s any easier to clean when it gets into a bad way. Eager to find a solution to the problem, the customer found Tile Doctor via the Internet, and not long after we arranged for me to come down to the property to see what could be done.

Quarry Tiles Before Restoration in Splott Cardiff Quarry Tiles Before Restoration in Splott Cardiff
Quarry Tiles Before Restoration in Splott Cardiff

Upon arriving at the property and giving the tiles an initial inspection, I explained that not all stains and marks will come off or out of the tiles, as some staining is simply permanent. Nonetheless, the customer indicated they would be satisfied with any improvement made to the condition of the floor. Having restored tiles similar to these before, I knew that the results could still come off very well using the right methods and products.

Cleaning a Stained Quarry Tiled Floor

To begin I mixed a strong solution of Tile Doctor NanoTech HBU and Pro Clean, a combination of two different cleaners. Pro Clean is a versatile, high alkaline cleaner that is used to deal with reasonably heavy soil build-up on natural stone floors. It also contains stripping properties that allow it to start breaking down any old sealers when left to dwell on the tiles. NanoTech HBU takes the cleaning process a step further: it is specially formulated to use nano-sized cleaning particles to reach dirt and stains deeply ingrained in the stone, before dissolving and lifting them out.

This solution was applied to the floor and, working in small sections, I scrubbed it into the tiles using a rotating scrubbing machine fitted with a nylon brush attachment. The floor was then rinsed, and the resulting cleaning slurry was vacuumed away using a wet-vax machine.

My next concern was the grout, which was afflicted by stubborn cement marks. I opted to remove these firstly by carefully applying Tile Doctor Grout Clean Up, an acid-based cleaner. Some cement marks remained despite the application, and so I attempted to manually scrape and chisel them away. While I had some good success, as mentioned not all cement stains can be removed, especially if they have been there for a long time. Some old cement mixture is as hard as flint!

Sealing a Quarry Tiled Floor

I left the floor to dry following the clean and came back two days later to seal the tiles, checking first that they were dry by taking multiple readings with the damp meter, and comparing them with earlier results.

The test results came back fine, so I started with the lengthy task of applying eight coats of Tile Doctor Seal and Go sealer. Having sealed similar floors with Seal and Go before I knew the results would be very desirable, with the deep natural colours in the stone being enhanced by the product. Seal and Go is my preferred sealer for Quarry tiles as it helps disguise some permanent marks and adds a durable satin shine finish.

Quarry Tiles After Restoration in Splott Cardiff
Quarry Tiles After Restoration in Splott Cardiff

While unfortunately a stained floor like this will never be able to look good as new, the results I managed to achieve were very pleasing. Certainly there was no evidence left of recent decoration, with the vast majority of the stains and marks no longer damaging the appearance of the tiles. The fresh seal has really brought out the red and black checked pattern in the floor. Needless to say the customer’s expectations were exceeded!

Quarry Tiles After Restoration in Splott Cardiff Quarry Tiles After Restoration in Splott Cardiff
Quarry Tiles After Restoration in Splott Cardiff

Professional Tile Cleaning and Sealing for a Badly Stained and Soiled Quarry Tiled Floor Restoration in South Wales

Old Victorian Tiled Hallway Floor Restored in Splott near Cardiff

After removing the hallway carpet the new householders had discovered a Victorian tiled floor and being keen to restore it as an original feature made contact with Tile Doctor. Restoring original features can add a lot a value to a house so it’s well worth pursuing.

Victorian Tiled Floor Hidden Under Carpet in Splot Victorian Tiled Floor Hidden Under Carpet in Splot

Restoring a Victorian Tiled Floor

The floor actually caught me out because on initial visit I’d made my judgement on a small area by the doorway which had been uncovered. After removing the rest of the floor covering however I could see the floor was in an extremely poor condition especially around the perimeter which had ingrained dirt and cement, old paint and was generally well worn. I would estimate the floor was original from at least 120 years ago

Before starting any cleaning I put the damp meter reader on several tiles to check the damp levels which read border line .15 -.17 in places which I was not very happy with especially as the weather we’ve had recently had been hot and dry in Cardiff for some time. Undeterred I scrapped the whole floor and then chiselled the edges with Hammer and bolster; next I mixed a 50:50 batch of Tile Doctor Remove and Go with NanoTech Ultra-Clean cleaner and applied this to the whole area, agitated it with a black pad fitted to a rotary machine and left it to dwell on the tile for half an hour so it could work on any old sealers that may have been present on the tile.

I then rinsed the floor twice and although the floor was looking better I could really see how bad the condition was so next I applied undiluted Tile Doctor Pro-Clean to the whole floor which is a strong alkaline cleaner. It was left to dwell on the floor for half an hour scrubbing in between, rinsing with clean water as I carried on.

Although improved again I was still not happy with the results especially the borders as there appeared to be dark cement stains deeply ingrained into the tiles which no doubt had been there for eighty years. So next step was to apply Tile Doctor Grout Clean-up which is designed to remove mineral deposits and cement, it’s very effective solution for this type of work and it removed most of the stains but not all.

The floor still needed more work so in my frustration I rinsed the floor and mixed a concoction of Remove and Go, Pro-Clean and Grout Clean-up together with a squirt of the NanoTech Ultra-Clean cleaner and spread it over the whole area leaving it to dwell for around 10 minutes before scrubbing it again. The floor was then rinsed and then for the final clean I steam cleaned the area twice rinsing in-between.

Victorian Tiled Floor Discovered in Splot Before Victorian Tiled Floor Discovered in Splot Before

Sealing a Victorian Floor Sealing

The cleaning was done on a Friday and then left to dry out over the weekend. I returned on Monday and tested for moisture which was slightly high in places so being ever over precautions dried the whole floor with a heat gun until it gave me an absolute dry meter reading.

I left the floor to cool down to ambient temperature and then sealed it with three coats of Tile Doctor Seal and Go. The customer was over the moon and I think you will agree that the tiles have been renovated to a high standard.

Victorian Tiled Floor Discovered in Splot After Victorian Tiled Floor Discovered in Splot After


Victorian Tiled floor Restored in Splott, South Wales

Scroll to top